X Deep – Zoes 38

zoes 38

Geometry – key to perfect position underwater

The structure of the bladder may help or hinder reaching the optimal trim. In ZEOS wing the buoyancy center agrees with the gravity center of gas in the cylinder.

What does it mean for you?

Perfect trim during the entire dive, regardless of whether your card reads OWD or Full Trimix.

The outer shell of ZEOS wing is made of Cordura® 1100 dTEX which is a high resistant material.

Do I need “such a strong” material?

Cordura® fibers are much more abrasion-resistant than Nylon. They are equally important during recreational diving in Egypt and for technical diving. Cordura-fabric wing are more durable and will still look like NEW even after many dives.

ZEOS 28 was built in such a way that when the diver is surfaced, only the smallest possible part of the wing sticks out of the water. Then the bladder displacement is effectively maintained to keep the diver surfaced.

Thanks to such a solution, ZEOS 38 keeps the diver sufficiently high, which is important especially at sea and provides perfect comfort also in high wave environment.

The total displacement of ZEOS 38 is more than 17 kg while maintaining a compact size.

We reduced the dead zones to the minimum and designed such a contour of the bladder which fails to stick out above the cylinder, and at the same time it maximizes the displacement.

That is why, ZEOS 38 provides very little drag in the water and the use of inflator is very comfortable.

 

Share

X Deep – Zeos 28

zoes28

Compact design

ZEOS 28 wing is very compact in its dimensions. It is mainly purchased for warm water holidays and by persons of slight build, especially women.

A more compact wing means less drag in the water, which has a positive impact on the use of air, especially during dives in strong currents.

The total displacement of ZEOS 28 wing is 13 kg and it is entirely sufficient, if you use up to 8 kg of the weight.

The structure of the bladder may help or hinder reaching the optimal trim. In ZEOS wing the buoyancy center agrees with the gravity center of gas in the cylinder.

What does it mean for you?

Perfect trim during the entire dive, regardless of whether your card reads OWD or Full Trimix.

ZEOS został tak skonstruowany, by podczas pobytu na powierzchni jak najmniejsza część skrzydła wystawała z wody.

ZEOS 28 was built in such a way that when the diver is surfaced, only the smallest possible part of the wing sticks out of the water. Then the bladder displacement is effectively maintained to keep the diver surfaced.

Thanks to such a solution, ZEOS 38 keeps the diver sufficiently high, which is important especially at sea and provides perfect comfort also in high wave environment.

Share

X Deep – Stealeth 2.0

Stealth 2.0

Side Mount revolution has begun!

While designing Stealth 2.0 set, we analysed the side mount harnesses available on the market, taking into account their good and bad points. However, Stealth 2.0 is not a copy of one of them but a totally new, revolutionary structure which works well in both Yucatan caves and European cold waters.

The stealth 2.0 Side Mount System comprises of several elements, the configuration of which can be adjusted exactly to your needs.

We are certain that no other side mount system is such versatile as the Stealth 2.0.

Inside the mount configuration, the correct distribution of weight required due to dry suit and thick undergarment is a serious challenge.

The unique Stealth 2.0 weight system solves the problem completely: you can even take 16kg of weight and distribute it in such a way so as to reach the ideal trim.

Double-shell structure of the BC with outer shell made of Cordura 1100 dTEX provides the highest level of safety for wreck diving.

The Stealth 2.0 BC has a unique multi-chamber design to fit the body tightly, regardless of how full it is. Its anatomical shape makes it extremely comfortable.

Share

X Deep – HYDROS 50

Hydros 50

Perfect buoyancy for 2×12 twinset + stage

The buoyancy of HYDROS 50 wing totals 23 kg, thanks to which it is perfect for diving with 2×12 twinset and stage providing sufficient reserve of buoyancy in case of emergency.

HYDROS 50 is a perfect wing for ambitious technical dives and will also work well for advanced recreational dives

HYDROS 50 model was built in such a way that its centre of buoyancy is placed on exactly the same level as the gravity centre of gas in the cylinder. Thanks to this, the trim does not change during the entire dive and remains the same with full and empty cylinders.

The geometry of HYDROS model, especially its contour, provides properly significant righting moment, which makes it a lot easier to reach the correct horizontal position.

To make access to the valves easier, we massively reduced the dead zone in the upper part of the bladder to the minimum. As a result, there is no “loose cloth” effect which makes access to valves difficult while doing a V-Drill.

The reduced bladder volume in the place where hoses are situated makes guiding them also much easier

In the HYDROS 50, we reduced to minimum the part which sticks out above the water while the diver is surfaced. Therefore, the significant part of the displacement is used effectively to keep the diver surfaced.

You will feel the difference during high wave dives at sea, especially when you have with you full stage cylinders.

Share

X Deep -Ghost

ghost

Complete SCUBA BCD
only 2.3kg total weight!

It’s hard to believe that the GHOST system weighs in at only 2.3kg!

In an age of ever increasing luggage charges this is great news for your wallet and also your arms and back.

 

An anatomic Next Generation Harness, soft 3D Mesh backplate pads, a refined geometry allowing a perfect trim under water and an extremely high position on the surface – you will appreciate it all while waiting for the boat in choppy seas.
How many times have you hit your head against the first stage during a dive? Many divers lower the tanks down their back in this situation and the wing goes up, but whilst avoiding a headache, it affects trim and leads to a bad diving position.

The GHOST is the only system on the market that allows the adjustment of both the tank and the wing allowing you to enjoy a comfortable dive regardless of your height.

Adjusting the tank and wing allows you to perfect your trim leaving you free to relax and look around.

The shape of a classical elbow prevents it being used in the optimal place. Where old technology creates a barrier, we like to think out of the box and so we designed a completely new one. Our new, unique solution is a specific shape that allows us to put it in the exact middle of the wing without any interference with a cylinder.
This revolutionary adaptor ensures a better working inflator. The Wing deflates more easily and the wing is inflated more proportionally and precisely – this results in precise buoyancy control

Share

Weights Pocket

waight pockets

Big capacity: 2x6kg

The xDEEP weight pockets of XL size can contain a 12 kg of weight!

Such a capacity makes it perfect for cold water dives where dry suit and thick undergarment or thick wet suit require a significant amount of weight.

Do you need less weight in warm waters?

It is simple: the adjustment system makes it possible to reduce the capacity so you don’t have to change the pockets for your trip.

Easier and safer carrying of weight

Secure-mount weight and easy drop

Protection against lead compounds

Stable mounting

Reinforced front edge

 

Share

Side Mount Trim Pocket

trim pocket

Place them, where needed

The trim pockets can be placed both on the shoulder straps and on the waist strap. It provides enormous opportunities for the trim in the side mount configuration.

Inside the pockets, we inserted special reinforcement made of highly durable polymer. It makes the solid belt weight fit tightly to the strap. Therefore, nothing is loose and nothing bumps, which could result in significant discomfort.

Important: The xDEEP trim pockets can be used with any side mount or DIR harness in which 50 mm-wide webbing was applied.

 

Share

Open ended

Open ended 130 cm

Visible also at night and at very long distances

The xDEEP SMB is equipped with a special 3M Scotchlite reflective tape with SOLAS maritime visibility certificate.

This perfect fluorescent material guarantees that your buoy will be visible at a very long distance. It is especially important at sea where at night it is very difficult to make out something as small as a surface marker buoy.

In the lower part, the SMB is equipped with a rubber band loop which the rolled up buoy is ideally cleared and takes up little space.

Such a solution is much better than any buoy holder, since when it is needed, you can unroll it with one move without wasting time

Space for chemical light or message and Easy to deploy

 

Share

D-Rings

Straight D-Ring

Strong, welded 6mm D-Rings

The harness comprises of solid D-Rings made of acid-proof steel of 6 mm section. The ends are welded and the weld itself is smoothly polished.

Such D-Rings will not deform under any circumstances, even while jumping with the fastened stage cylinders.

 

Share

Closed 145 CM SMB

Closed SMB 140 CM

145 cm of perfect visibility

The SMB must be visible at a long distance. The bright color of the xDEEP buoy is clearly visible even during unfavorable weather conditions and complies with the requirements of the maritime visibility standards.

The SMB is not an advertising banner, therefore we decided to leave the buoy material free from the big logo of the xDEEP to make the bright-coloured surface as large as possible.

Visible also at night and at very long distances

The xDEEP SMB is equipped with a special 3M Scotchlite reflective tape with SOLAS maritime visibility certificate.

This perfect fluorescent material guarantees that your buoy will be visible at a very long distance. It is especially important at sea where at night it is very difficult to make out something as small as a surface marker buoy.

In the lower part, the SMB is equipped with a rubber band loop which the rolled up buoy is ideally cleared and takes up little space.

Such a solution is much better than any buoy holder, since when it is needed, you can unroll it with one move without wasting time

Space for chemical light or message and Easy to deploy

 

Share

Closed 90 cm

Closed SMB 90 CM

Ideal when training, and for use in inland waters and other calm conditions

The 90cm SMB is easier to use than longer buoys and takes up less space in your pocket. It’s a great solution for lakes, quarries and other conditions where there are no significant waves.

Whilst more compact than its bigger brother, the 90cm SMB incorporates exactly the same features and is made from the same premium materials as the longer xDEEP DSMBs.

Visible also at night and at very long distances

The xDEEP SMB is equipped with a special 3M Scotchlite reflective tape with SOLAS maritime visibility certificate.

This perfect fluorescent material guarantees that your buoy will be visible at a very long distance. It is especially important at sea where at night it is very difficult to make out something as small as a surface marker buoy.

In the lower part, the SMB is equipped with a rubber band loop which the rolled up buoy is ideally cleared and takes up little space.

Such a solution is much better than any buoy holder, since when it is needed, you can unroll it with one move without wasting time

Space for chemical light or message and Easy to deploy

 

Share

3D Mesh

3D Mesh back plats

3D Mesh filling of neutral buoyancy

The lining is made of 3D Mesh filling which behaves totally different than foam linings. Water can easily penetrate the space inside the lining, which makes it resistant to any changes in the pressure.

As a result, in contrast with foam linings you do not need extra weight to descend, and the lining itself does not become thinner as depth increases.

 

3D Mesh pads 3D Mesh

Share
Share