Onyx II

Onyx_DIN_0

Onyx II

1st stage:

The Onyx CW is available in yoke and DIN (with or without adaptor) styles.

  • Environmentally Sealed and Cold Water kit installed
  • Balanced Diaphragm
  • 5 LP Ports
  • 2 HP Ports
  • Ideal for cold water
  • Lighter weight

 

2nd stage:

  • Downstream valve
  • Balanced Diaphragm
  • Dive/Pre Dive Venturi Control
  • Diver Adjustable Breathing Sensitivity
  • New Compact Profile
  • Braided Hose Length: 30 in. (.76 m)

Onyx_YOKE_0

Share

Octo-Z

320-7200YL Octo-Z yellow 01

  • High flow QD connections for air supply
  • Corrugated hose disconnect (So Octo-Z can easily be stored with regulator.)
  • Corrugated hose rinse connection. (Allows a garden hose to be connected to the BC for easy effective rinsing.)
  • Light but rugged design
  • Balanced inflation valve, for easy use and precise BC fill-rate control. (The BC can be orally inflated through the Octo-Zs mouthpiece.)
  • Both QD and corrugated hose fittings rotate (even under pressure) for easy, comfortable placement of the Octo-Zs body.
  • Ergonomic placement and contrasting colors make the Inflate and Deflate buttons easy to find, distinguish and operate

 

Share

F8

Regulator_F8_close

1st stage:

  • Balanced diaphragmdesign and the environmentally sealed ambient chamber ensure top performance in any condition.
  • Redesigned environmental seal cap and yoke knob enhance ergonomics & design aesthetics.
  • Percision machined neoflon seatharder more reliable material, keeping you diving longer

 

2nd stage:

  • New inhalation diaphragmprovides superior tear strength and improved response time to breathing (super soft silicone molded over a low friction disk).
  • Improved exhaust valveensures dryness and a lower exhalation effort.
  • Seat-saving orifice, compliments of Atomic Aquatics, retracts when not in use – extending the life of the breathing tube seat. (#5,803,073)
  • Seat comprised of soft silicone molded over a metal insert to deliver the firmness required for an airtight seal while maintaining the necessary elasticity to prevent leaking.
  • Redesigned front cover and inhalation effort control knob use co-molded components that provide the necessary grip, soft touch and ease of use. Available in several color kits
  • Zirconium-plated inlet tubeand heat sink for superior corrosion resistance.
  • Redesigned heat sinkdramatically increases surface area, aiding in the heat exchange necessary to avoid freeze-up.
  • Co-moldedsilicone mouthpiece for better fit and less jaw fatigue

Regulator_F8_GREY-Large RegulatorF8GREYCutoutDIN1 copy

Share

F8 Octopus

Regulator_F8_close_octo

  • New inhalation diaphragmprovides superior tear strength and improved response time to breathing (super soft silicone molded over a low friction disk).
  • Improved exhaust valveensures dryness and a lower exhalation effort.
  • Seat-saving orifice, compliments of Atomic Aquatics, retracts when not in use – extending the life of the breathing tube seat. (#5,803,073)
  • Seat comprised of soft silicone molded over a metal insert to deliver the firmness required for an airtight seal while maintaining the necessary elasticity to prevent leaking.
  • Redesigned front cover and inhalation effort control knob use co-molded components that provide the necessary grip, soft touch and ease of use. Available in several color kits
  • Zirconium-plated inlet tubeand heat sink for superior corrosion resistance.
  • Redesigned heat sinkdramatically increases surface area, aiding in the heat exchange necessary to avoid freeze-up.
  • Co-moldedsilicone mouthpiece for better fit and less jaw fatigu- See more at: http://www.zeagle.com/products-repository/regulators/regulator-accessories-alternate-air/f8-octopus#sthash.Z7nABw3v.dpuf
Share

Envoy II

2X50_DELUX_Din_0

1st stage:

The Envoy is available in yoke and DIN (with or without adaptor) styles.

  • Environmentally Sealed
  • Balanced Diaphragm
  • 5 LP Ports
  • 2 HP Ports
  • Lighter weight

 

2nd stage:

  • Downstream valve
  • Balanced Diaphragm
  • Dive/Pre Dive Venturi Control
  • Hose Length: 30 in. (.76 m)

350-3110 Envoy 03

Share

zena ( for women )

7104RK Zena 03

  • Elastic front panels with zipper closure for a comfortable, secure fit and a streamlined profile
  • Dual waistbands allow weights to be positioned below waist level for superior comfort and balance
  • Component sizing fits waist, torso length, and chest size independently
  • 31lb capacity bladder
  • 24lb capacity Ripcord weight system
  • 16lb capacity rear mount weight system
  • Expandable mesh “Quick Pocket” at waist
  • 4 Stainless Steel D-Rings
  • Dry Weight: 6.2 lbs
  • The front panel standard colors are: black, blue, grape, neon yellow, neon pink, floral white, floral blue, floral pink, and floral purple
  • Color customization available

Zena blue 01 Zena floral blue 01 Zena floral grape 01 edited Zena floral pink 01 Zena floral white 02 Zena grape 01 Zena neon pink 01

OLYMPUS DIGITAL CAMERA

OLYMPUS DIGITAL CAMERA

zena

Share

Stiletto

7104RK Stiletto 03

  • 35lb lift capacity low profile retracting bladder
  • Personal Fit System (PFS) sizing
  • Reinforced 1000 denier nylon construction
  • Sewn on lumbar Pad
  • Two zippered utility pockets
  • Adjustable elastic waist panels
  • 5 Stainless steel D-rings
  • Adjustable sternum strap
  • 24lb capacity Ripcord weight system
  • 16lb capacity rear mount weight system
  • Dry weight: 7.4 lbs
Share

Ranger LTD

7909RK Ranger LTD 03

  • 44lb lift capacity Ballistic bladder (standard, other capacities available as options)
  • 36lb capacity Ripcord® weight system
  • 20lb capacity rear trim weight system
  • PFS Modular Sizing
  • Heavily reinforced 1050 denier Ballistic nylon construction
  • 11″ grommets for mounting twin cylinders
  • Two zippered utility pockets at sides Adjustable elastic waist panels
  • 4 stainless steel D-rings on shoulders (two adjustable)
  • 2 stainless steel D-rings on vest
  • An extra set of vertically mounted D-rings are positioned ideally on the vest for mounting extra cylinders or accessories
  • Two additional 1.5″ D-rings are located at the bottom rear of the vest
  • Adjustable Sternum Strap
  • Single or twin tank capability (requires bladder attachment straps)
  • Dry Weight: 9.5 lbs
  • A lumbar pad is permanently mounted in the rear of the vest section
  • A pair of 18 lb capacity mesh weight pouches are included
  • Expandable zippered utility pocket on front of vest
  • A zipper attachment system mounted inside each wing of the bladder allows for the attachment of a variety of carriers and accessories, including Pony bottle carriers, Spare Air carriers, extra pockets, and grommet panels
Share

Halo

BCD_HALO

  • 1000 denier / urethane bladder material and the pocket, shoulder, harness, cummerbund mix of 1680D heavy duty, and 420/PU material.
  • Adjustable and depth compensating cummerbund
  • New and improved Ripcord® Weight Release System with new ergonomic handle design
  • 20 lbs max dumpable weight with custom made weight pouches and 10 lbs non-dumpable weight
  • Zeagle Personal Fit System® for easy custom shoulder replacement
  • 7 stainless steel d-rings (5×1.50, 2×1 inches), strategically placed
  • Dual knife mount positioning and dual retractor mount (left and right) pocket
  • 2 large easy access pockets for accessories
  • Adjustable tank band and tank positioning strap for easy attachment to the tank
  • Carry handle for convenient transport
  • Right shoulder and rear right pull dump
  • Comfort harness with lumbar support
  • Adjustable inflator retainer

 

HALO_3 HALO_5

Share

Express

7709WK-DLX Express Tech Deluxe 03

  • Deluxe harness including articulated shoulders and Airloc buckles
  • Sternum strap
  • Compact 24lb lift capacity retractable bladder assembly standard, accepts most optional bladders
  • Two sets of center plate grommets allow for attaching twin cylinders
  • Stainless steel grommets around the edge of the plate allow for multiple attachment points for accessories

519-WS130RC Ripcord Weight System 01 519-WS120 Zip Touch weight system 03

Share
Share