Buoyancy of all brands

X Deep – Zoes 38

zoes 38

Geometry – key to perfect position underwater

The structure of the bladder may help or hinder reaching the optimal trim. In ZEOS wing the buoyancy center agrees with the gravity center of gas in the cylinder.

What does it mean for you?

Perfect trim during the entire dive, regardless of whether your card reads OWD or Full Trimix.

The outer shell of ZEOS wing is made of Cordura® 1100 dTEX which is a high resistant material.

Do I need “such a strong” material?

Cordura® fibers are much more abrasion-resistant than Nylon. They are equally important during recreational diving in Egypt and for technical diving. Cordura-fabric wing are more durable and will still look like NEW even after many dives.

ZEOS 28 was built in such a way that when the diver is surfaced, only the smallest possible part of the wing sticks out of the water. Then the bladder displacement is effectively maintained to keep the diver surfaced.

Thanks to such a solution, ZEOS 38 keeps the diver sufficiently high, which is important especially at sea and provides perfect comfort also in high wave environment.

The total displacement of ZEOS 38 is more than 17 kg while maintaining a compact size.

We reduced the dead zones to the minimum and designed such a contour of the bladder which fails to stick out above the cylinder, and at the same time it maximizes the displacement.

That is why, ZEOS 38 provides very little drag in the water and the use of inflator is very comfortable.

 

Share

X Deep – Zeos 28

zoes28

Compact design

ZEOS 28 wing is very compact in its dimensions. It is mainly purchased for warm water holidays and by persons of slight build, especially women.

A more compact wing means less drag in the water, which has a positive impact on the use of air, especially during dives in strong currents.

The total displacement of ZEOS 28 wing is 13 kg and it is entirely sufficient, if you use up to 8 kg of the weight.

The structure of the bladder may help or hinder reaching the optimal trim. In ZEOS wing the buoyancy center agrees with the gravity center of gas in the cylinder.

What does it mean for you?

Perfect trim during the entire dive, regardless of whether your card reads OWD or Full Trimix.

ZEOS został tak skonstruowany, by podczas pobytu na powierzchni jak najmniejsza część skrzydła wystawała z wody.

ZEOS 28 was built in such a way that when the diver is surfaced, only the smallest possible part of the wing sticks out of the water. Then the bladder displacement is effectively maintained to keep the diver surfaced.

Thanks to such a solution, ZEOS 38 keeps the diver sufficiently high, which is important especially at sea and provides perfect comfort also in high wave environment.

Share

X Deep – Stealeth 2.0

Stealth 2.0

Side Mount revolution has begun!

While designing Stealth 2.0 set, we analysed the side mount harnesses available on the market, taking into account their good and bad points. However, Stealth 2.0 is not a copy of one of them but a totally new, revolutionary structure which works well in both Yucatan caves and European cold waters.

The stealth 2.0 Side Mount System comprises of several elements, the configuration of which can be adjusted exactly to your needs.

We are certain that no other side mount system is such versatile as the Stealth 2.0.

Inside the mount configuration, the correct distribution of weight required due to dry suit and thick undergarment is a serious challenge.

The unique Stealth 2.0 weight system solves the problem completely: you can even take 16kg of weight and distribute it in such a way so as to reach the ideal trim.

Double-shell structure of the BC with outer shell made of Cordura 1100 dTEX provides the highest level of safety for wreck diving.

The Stealth 2.0 BC has a unique multi-chamber design to fit the body tightly, regardless of how full it is. Its anatomical shape makes it extremely comfortable.

Share

X Deep – HYDROS 50

Hydros 50

Perfect buoyancy for 2×12 twinset + stage

The buoyancy of HYDROS 50 wing totals 23 kg, thanks to which it is perfect for diving with 2×12 twinset and stage providing sufficient reserve of buoyancy in case of emergency.

HYDROS 50 is a perfect wing for ambitious technical dives and will also work well for advanced recreational dives

HYDROS 50 model was built in such a way that its centre of buoyancy is placed on exactly the same level as the gravity centre of gas in the cylinder. Thanks to this, the trim does not change during the entire dive and remains the same with full and empty cylinders.

The geometry of HYDROS model, especially its contour, provides properly significant righting moment, which makes it a lot easier to reach the correct horizontal position.

To make access to the valves easier, we massively reduced the dead zone in the upper part of the bladder to the minimum. As a result, there is no “loose cloth” effect which makes access to valves difficult while doing a V-Drill.

The reduced bladder volume in the place where hoses are situated makes guiding them also much easier

In the HYDROS 50, we reduced to minimum the part which sticks out above the water while the diver is surfaced. Therefore, the significant part of the displacement is used effectively to keep the diver surfaced.

You will feel the difference during high wave dives at sea, especially when you have with you full stage cylinders.

Share

X Deep -Ghost

ghost

Complete SCUBA BCD
only 2.3kg total weight!

It’s hard to believe that the GHOST system weighs in at only 2.3kg!

In an age of ever increasing luggage charges this is great news for your wallet and also your arms and back.

 

An anatomic Next Generation Harness, soft 3D Mesh backplate pads, a refined geometry allowing a perfect trim under water and an extremely high position on the surface – you will appreciate it all while waiting for the boat in choppy seas.
How many times have you hit your head against the first stage during a dive? Many divers lower the tanks down their back in this situation and the wing goes up, but whilst avoiding a headache, it affects trim and leads to a bad diving position.

The GHOST is the only system on the market that allows the adjustment of both the tank and the wing allowing you to enjoy a comfortable dive regardless of your height.

Adjusting the tank and wing allows you to perfect your trim leaving you free to relax and look around.

The shape of a classical elbow prevents it being used in the optimal place. Where old technology creates a barrier, we like to think out of the box and so we designed a completely new one. Our new, unique solution is a specific shape that allows us to put it in the exact middle of the wing without any interference with a cylinder.
This revolutionary adaptor ensures a better working inflator. The Wing deflates more easily and the wing is inflated more proportionally and precisely – this results in precise buoyancy control

Share

zena ( for women )

7104RK Zena 03

  • Elastic front panels with zipper closure for a comfortable, secure fit and a streamlined profile
  • Dual waistbands allow weights to be positioned below waist level for superior comfort and balance
  • Component sizing fits waist, torso length, and chest size independently
  • 31lb capacity bladder
  • 24lb capacity Ripcord weight system
  • 16lb capacity rear mount weight system
  • Expandable mesh “Quick Pocket” at waist
  • 4 Stainless Steel D-Rings
  • Dry Weight: 6.2 lbs
  • The front panel standard colors are: black, blue, grape, neon yellow, neon pink, floral white, floral blue, floral pink, and floral purple
  • Color customization available

Zena blue 01 Zena floral blue 01 Zena floral grape 01 edited Zena floral pink 01 Zena floral white 02 Zena grape 01 Zena neon pink 01

OLYMPUS DIGITAL CAMERA

OLYMPUS DIGITAL CAMERA

zena

Share

Stiletto

7104RK Stiletto 03

  • 35lb lift capacity low profile retracting bladder
  • Personal Fit System (PFS) sizing
  • Reinforced 1000 denier nylon construction
  • Sewn on lumbar Pad
  • Two zippered utility pockets
  • Adjustable elastic waist panels
  • 5 Stainless steel D-rings
  • Adjustable sternum strap
  • 24lb capacity Ripcord weight system
  • 16lb capacity rear mount weight system
  • Dry weight: 7.4 lbs
Share

Ranger LTD

7909RK Ranger LTD 03

  • 44lb lift capacity Ballistic bladder (standard, other capacities available as options)
  • 36lb capacity Ripcord® weight system
  • 20lb capacity rear trim weight system
  • PFS Modular Sizing
  • Heavily reinforced 1050 denier Ballistic nylon construction
  • 11″ grommets for mounting twin cylinders
  • Two zippered utility pockets at sides Adjustable elastic waist panels
  • 4 stainless steel D-rings on shoulders (two adjustable)
  • 2 stainless steel D-rings on vest
  • An extra set of vertically mounted D-rings are positioned ideally on the vest for mounting extra cylinders or accessories
  • Two additional 1.5″ D-rings are located at the bottom rear of the vest
  • Adjustable Sternum Strap
  • Single or twin tank capability (requires bladder attachment straps)
  • Dry Weight: 9.5 lbs
  • A lumbar pad is permanently mounted in the rear of the vest section
  • A pair of 18 lb capacity mesh weight pouches are included
  • Expandable zippered utility pocket on front of vest
  • A zipper attachment system mounted inside each wing of the bladder allows for the attachment of a variety of carriers and accessories, including Pony bottle carriers, Spare Air carriers, extra pockets, and grommet panels
Share

Halo

BCD_HALO

  • 1000 denier / urethane bladder material and the pocket, shoulder, harness, cummerbund mix of 1680D heavy duty, and 420/PU material.
  • Adjustable and depth compensating cummerbund
  • New and improved Ripcord® Weight Release System with new ergonomic handle design
  • 20 lbs max dumpable weight with custom made weight pouches and 10 lbs non-dumpable weight
  • Zeagle Personal Fit System® for easy custom shoulder replacement
  • 7 stainless steel d-rings (5×1.50, 2×1 inches), strategically placed
  • Dual knife mount positioning and dual retractor mount (left and right) pocket
  • 2 large easy access pockets for accessories
  • Adjustable tank band and tank positioning strap for easy attachment to the tank
  • Carry handle for convenient transport
  • Right shoulder and rear right pull dump
  • Comfort harness with lumbar support
  • Adjustable inflator retainer

 

HALO_3 HALO_5

Share

Express

7709WK-DLX Express Tech Deluxe 03

  • Deluxe harness including articulated shoulders and Airloc buckles
  • Sternum strap
  • Compact 24lb lift capacity retractable bladder assembly standard, accepts most optional bladders
  • Two sets of center plate grommets allow for attaching twin cylinders
  • Stainless steel grommets around the edge of the plate allow for multiple attachment points for accessories

519-WS130RC Ripcord Weight System 01 519-WS120 Zip Touch weight system 03

Share

Paragon

paragon

Durable, Comfortable and Affordable

  • Traditional jacket style BC
  • Tough enough for rental usage
  • Time-proven, reliable inflator
  • Rapid exhaust dump
  • Stable hard pack design – padded for comfort
  • Single standard length cam band
  • Two, expandable, velcro-closure pockets
  • Adjustable length cummerbund
  • Built-in carry handle
  • Different inflator button colors easy for size identification
  • Optional sternum strap p/n BP51
  • Optional rear pull dump p/n BP52

 

Share

Mission

BC001

 

  • Tough fast drying/low weight property 420 denier
  • Balanced Superior Inflator inflates and deflates at a touch of a button
  • Stable padded hard pack with built-in carry handle
  • Two expandable velcro pockets
  • Quick-release adjustable shoulder buckles
  • Flexible cummerbund with quick-release buckles
  • Rear pull dump valve
  • Six stainless steel D-rings

 

BC001-Back

Share

Iconic

BC002

 

  • Patented SLQR (Secure-Lock-Quick-Release) weight-integrated release system
  • Two quick-release weight pockets (max integrated weight 10 lbs per side)
  • Two rear weight pockets (max 5 lbs per side)
  • 840 Denier TPU nylon aircell
  • Balanced Superior Inflator inflates and deflates at a touch of a button
  • Right shoulder and rear pull dump valves
  • Stable padded hard pack with built-in carry handle
  • Rolled neoprene neck collar
  • Quick-release adjustable shoulder buckles
  • Flexible cummerbund with quick-release buckles
  • Two zippered pockets
  • 7 stainless steel D-rings

 

BC002-Back

Share

Tilos Armada

BC003-Side

 

  • 3-D rear inflation aircell design for increased buoyancy
  • Detachable aircell – replaceable in case of damage
  • Patented SLQR (Secure-Lock-Quick-Release) weight-integrated release system
  • Two quick-release weight pockets – maximum 10 lbs (4.54kg) per side
  • Two rear weight pockets – maximum 5 lbs (2.27kg) per side
  • Rugged 840 Denier TPU nylon aircell construction
  • Balanced Superior Inflator inflates and deflates at a touch of a button
  • Lower rear pull dump valve and integrated shoulder pull dump airway valve
  • Stable padded hard pack with built-in carry handle
  • Rolled neoprene neck collar
  • Quick-release adjustable shoulder buckles
  • Flexible cummerbund with quick-release buckles
  • Adjustable integrated chest strap with quick-release buckles
  • Two large 1000 Denier Nylon zippered pockets w/YKK #10 zippers
  • 5 stainless steel and 2 Delren D-rings
  • Integrated knife mounting grommet

 

BC003-Rear-Weight-Pocket BC003-Back BC003

Share

CRESSI b.c.d

S_0IC721800_01

Description:

the Start Pro gives students and customers the stability of a jacket style BC and the convenience of weight integration.

Diver operators will appreciate its bullet-proof construction using 1000 and 500 Denier Cordura and large, easily seen size markings on the shoulder.

Technical features:

-Ultra durable construction from 1000 and 500 Denier Cordura

-Integrated weight pockets use rugged quick-release buckles

– 2 large pockets cargo pockets with velcro closure

– Rigid padded backpack and carry handle

-Three exhaust valves for buoyancy adjustment in any position

-2 technopolymer D-rings

-2 spring-clip holding rings

– Size printed clearly on the harness

Size XS-S-M-L-XL

 

 

S_0IC721800_50 S_0IC721800_51 S_0IC721800_52

Share

poseidon b.c.d

oneharness

Featured in 4 colors and made in CorduraTM 1000.
Products that can be fitted onto the One system:

Pockets
Weight Pocket Large
Weightpocket Besea QR
Combi Pocket B.C. M
Trim Weight Pocket
Accessory Pocket B.C. S & M

Backplate
Backplate (steel) Besea
Adapters
QMR
11-inch Adapter
D-rings
D-ring Kit BeSea prebent

Air Supply Hose (comes as standard with your One Wing)
Crotch Strap (comes as standard with your One Harness)

img_2673b poseidon_product_vingar_ret

Share
Share